Tones for Tots Little Lamb

£20.99

We know you want the best for your little one. At Fusion™, we want the same.

 

We at Fusion™ wanted to develop a paint that was TRULY zero VOC and non-toxic for you and your loved ones. Through years of development we have achieved this without sacrificing quality and durability. Fusion is a best-in-class paint that features an environmentally and health conscious formulation.

 

Babies and young children are more susceptible to the health risks associated with VOCs. Our Paint is lead-free, phlalate free, formaldehyde free, ammonia free, virtually odourless and is Zero VOC.

 

Fusion™ cares about you and your wee ones. Our Tones for Tots™ collection complies with both the lead and phlalate restrictions of the Toy Safety Standards of North America and Europe, as well as the ASTM D4236 LHAMA safety labeling requirements.

 

1. CPSIA Act of 2008- Section 108 – Pthalates
2. ASTM D-4236 -Confirming that the products have been properly labeled, and there is no chronic health hazard, in accordance with the federal Labeling Hazardous Art Materials Act (LHAMA)
3. CPSIA Section 101 – Total Lead In Paints & Surface Coating

Sharing is caring!

Out of stock

Description

Fresco gives you the perfect sea swept, weathered, worn and rustic texturized look. Fresco is 100% Natural and contains no VOC’s. Depending on your mix and application, you will get a different end result.

 

Our small Package will make 1 Pint of the Sea Swept or Crackled Heavy Texture look, or 5 Pints of Flat Matte Chalky Finish. Enough to paint the huge 7 foot wardrobe you see here!

 

Sea Swept: Mix 1 part Fresco to 2 parts Fusion™ Mineral Paint with a whisk or a paint stir stick for approximately 30 seconds.

 

*Lumps and chunks are expected and desired to create the textured effect. For less texture, whisk to remove all lump for the flat matte chalky finish.

 

Apply mixture to your paint ready surface. Allow to set for 10-20 minutes then knock down any heavy lumps by passing your brush over them. Allow to fully dry, then continue with additional colours and layers of paint. Fresco is not required in additional layers of paint.

 

*Stippling adds texture.

 

Complete the look by wet sanding to expose your multiple layers of paint and texture! For best results use a 220 grit sanding sponge. For antiquing, use our Espresso Wax, or Antiquing Glaze to enhance all the details.

CRACKLED HEAVY TEXTURE

Mix 1 part Fresco to 2 parts Fusion Mineral Paint.

 

Apply a thick (2-3mm) layer of mixture to your paint ready surface. Allow to set for 10-20 minutes. Knock down any heavy lumps by passing your brush over them. The heavier the texture the larger the cracks. Applying sunlight or heat will increase crackle effect.

FLAT MATTE CHALKY FINISH

Mix 1 part Fresco to 8 parts Fusion Mineral Paint.

 

1 Small Bag will make 2.5 Quarts or 5 Pints of Flat Matte Chalky Finish.

 

Apply mixture in various directions for a hand painted look immediately upon application. If any lumps occur, brush them out. If using the included scoop, add 4 scoops per Pint for this look. Add more or less as desired

Sharing is caring!