workshops

Showing all 8 results

  • 1″ Fusion flat brush

    £2.99

    Fusion™ glides beautifully onto your surface, a high quality product deserves high quality tools.

     

    We have an entire repertoire of brushes sure to meet any of your painting needs.

     

    Be sure to use our Brush Cleaner to keep your bristles in pristine condition!

    Tip

    All brushes, no matter the price and quality, lose bristles when new. So you don’t need to rush back to the store where you purchased yours for a replacement.

     

    As soon as you unwrap your new brush, hold it firmly and pull on the bristles a few times to coax any loose hairs out. Then use Fusion™ Brush Cleaner to clean your brush well. Let dry and paint away!

    Read moreDone
  • 2" flat brush

    2″ Fusion flat brush

    £3.75

    Fusion™ glides beautifully onto your surface, a high quality product deserves high quality tools.

     

    We have an entire repertoire of brushes sure to meet any of your painting needs.

     

    Be sure to use our Brush Cleaner to keep your bristles in pristine condition!

    Tip

    All brushes, no matter the price and quality, lose bristles when new. So you don’t need to rush back to the store where you purchased yours for a replacement.

     

    As soon as you unwrap your new brush, hold it firmly and pull on the bristles a few times to coax any loose hairs out. Then use Fusion™ Brush Cleaner to clean your brush well. Let dry and paint away!

    Read moreDone

  • FRESCO lrg 400grams

    £34.99

    Fresco gives you the perfect sea swept, weathered, worn and rustic texturized look. Fresco is 100% Natural and contains no VOC’s. Depending on your mix and application, you will get a different end result.

     

    Our small Package will make 1 Pint of the Sea Swept or Crackled Heavy Texture look, or 5 Pints of Flat Matte Chalky Finish. Enough to paint the huge 7 foot wardrobe you see here!

     

    Sea Swept: Mix 1 part Fresco to 2 parts Fusion™ Mineral Paint with a whisk or a paint stir stick for approximately 30 seconds.

     

    *Lumps and chunks are expected and desired to create the textured effect. For less texture, whisk to remove all lump for the flat matte chalky finish.

     

    Apply mixture to your paint ready surface. Allow to set for 10-20 minutes then knock down any heavy lumps by passing your brush over them. Allow to fully dry, then continue with additional colours and layers of paint. Fresco is not required in additional layers of paint.

     

    *Stippling adds texture.

     

    Complete the look by wet sanding to expose your multiple layers of paint and texture! For best results use a 220 grit sanding sponge. For antiquing, use our Espresso Wax, or Antiquing Glaze to enhance all the details.

    CRACKLED HEAVY TEXTURE

    Mix 1 part Fresco to 2 parts Fusion Mineral Paint.

     

    Apply a thick (2-3mm) layer of mixture to your paint ready surface. Allow to set for 10-20 minutes. Knock down any heavy lumps by passing your brush over them. The heavier the texture the larger the cracks. Applying sunlight or heat will increase crackle effect.

    FLAT MATTE CHALKY FINISH

    Mix 1 part Fresco to 8 parts Fusion Mineral Paint.

     

    1 Small Bag will make 2.5 Quarts or 5 Pints of Flat Matte Chalky Finish.

     

    Apply mixture in various directions for a hand painted look immediately upon application. If any lumps occur, brush them out. If using the included scoop, add 4 scoops per Pint for this look. Add more or less as desired

    Read moreDone

  • FRESCO sml 75grams

    £12.99

    Fresco gives you the perfect sea swept, weathered, worn and rustic texturized look. Fresco is 100% Natural and contains no VOC’s. Depending on your mix and application, you will get a different end result.

     

    Our small Package will make 1 Pint of the Sea Swept or Crackled Heavy Texture look, or 5 Pints of Flat Matte Chalky Finish. Enough to paint the huge 7 foot wardrobe you see here!

     

    Sea Swept: Mix 1 part Fresco to 2 parts Fusion™ Mineral Paint with a whisk or a paint stir stick for approximately 30 seconds.

     

    *Lumps and chunks are expected and desired to create the textured effect. For less texture, whisk to remove all lump for the flat matte chalky finish.

     

    Apply mixture to your paint ready surface. Allow to set for 10-20 minutes then knock down any heavy lumps by passing your brush over them. Allow to fully dry, then continue with additional colours and layers of paint. Fresco is not required in additional layers of paint.

     

    *Stippling adds texture.

     

    Complete the look by wet sanding to expose your multiple layers of paint and texture! For best results use a 220 grit sanding sponge. For antiquing, use our Espresso Wax, or Antiquing Glaze to enhance all the details.

    CRACKLED HEAVY TEXTURE

    Mix 1 part Fresco to 2 parts Fusion Mineral Paint.

     

    Apply a thick (2-3mm) layer of mixture to your paint ready surface. Allow to set for 10-20 minutes. Knock down any heavy lumps by passing your brush over them. The heavier the texture the larger the cracks. Applying sunlight or heat will increase crackle effect.

    FLAT MATTE CHALKY FINISH

    Mix 1 part Fresco to 8 parts Fusion Mineral Paint.

     

    1 Small Bag will make 2.5 Quarts or 5 Pints of Flat Matte Chalky Finish.

     

    Apply mixture in various directions for a hand painted look immediately upon application. If any lumps occur, brush them out. If using the included scoop, add 4 scoops per Pint for this look. Add more or less as desired

    Read moreDone

  • Fusion round medium brush

    £23.99

    Fusion™ glides beautifully onto your surface, a high quality product deserves high quality tools.

     

    We have an entire repertoire of brushes sure to meet any of your painting needs.

     

    Be sure to use our Brush Cleaner to keep your bristles in pristine condition!

    Tip

    All brushes, no matter the price and quality, lose bristles when new. So you don’t need to rush back to the store where you purchased yours for a replacement.

     

    As soon as you unwrap your new brush, hold it firmly and pull on the bristles a few times to coax any loose hairs out. Then use Fusion™ Brush Cleaner to clean your brush well. Let dry and paint away!

    Read moreDone
  • Fusion Sandstone Texture

    Fusion Sandstone Texture.

    £14.95

    Fusion™ Sand Stone Texture is an acrylic based soft plaster type medium with a fine sand finish.

     

    It is perfect if you are trying to achieve an old textured finish.

     

    It can be brushed, rolled or pulled through Stencils for a dimensional effect.

     

    It can be tinted using Fusion™ Paints or Tints.

     

    It can also be used to give the effect of old paint build up by sponging it on in areas and then painting over it.

    Read moreDone

  • Fusion small round brush

    £17.99

    Fusion™ glides beautifully onto your surface, a high quality product deserves high quality tools.

     

    We have an entire repertoire of brushes sure to meet any of your painting needs.

     

    Be sure to use our Brush Cleaner to keep your bristles in pristine condition!

    Tip

    All brushes, no matter the price and quality, lose bristles when new. So you don’t need to rush back to the store where you purchased yours for a replacement.

     

    As soon as you unwrap your new brush, hold it firmly and pull on the bristles a few times to coax any loose hairs out. Then use Fusion™ Brush Cleaner to clean your brush well. Let dry and paint away!

    Read moreDone

  • Fusion smooth Pearl Embossing paste.

    £14.95

    Fusion™ Smooth Embossing Paste – Pearl is an acrylic based medium that has a thick consistency.

     

    It is ideal to use for embossing through stencil patterns to create a raised effect. It will dry translucent with a pearl finish and can then be painted, glazed or waxed over to enhance your design.

     

    Can be tinted with our specialty tints in Copper, Silver, Pale Gold and Bronze colours to create beautiful effects. Tinted embossing paste using our tinting kit will have a different kind of effect given the lighting and angles they appear under.

     

    They can be applied by using a damp sponge, spatulas, brushed, or used with stencils.

     

    These are great for embellishing raised areas and creating a more contemporary look

    Read moreDone